Vango Airspeed Tube AT016 3GCA2D 712 X 13cm

VANGO AIRSPEED TUBE AT016 712cm x 13cm

In the unlikely event that you may need to replace your AirBeam® tube, simply remove the old tube, pump up the new one and place inside the inner tent tube.
The AirSpeed tubes are quick and easy to change, so that you can carry on with your camping holiday as soon as possible!
Proceedure
• Fully deflate the AirBeam® tube to be replaced
• Unzip the outer sleeve of the AirBeam® on the inside of the flysheet
• Remove the AirBeam® from the internal zipped sleeve.
• Cut the cable tie that holds the zips together (ties stop accidental opening)
• Remove the inner tube from its protective outer
• Place the new inner tube inside the protective outer. Align valve with the opening in the protective outer. Zip closed, taking care not to catch the inner tube. Reconnect the zips together with the cable tie provided, to prevent accidental opening when the AirBeam® is inflated
• Re-inflate AirBeam® to the correct PSI
• Re-insert the AirBeam® into the zipped sleeve on the tent flysheet